AnyTone 578 Go Box
The AnyTone 578 Go Box features two 6ah LifePo4 batteries for a total of 12ah of battery capacity. The batteries can be charged with 14.6v via the Anderson Powerpole connectors. The GPS antenna SMA port is accessible via the faceplate. Additionally, the USB port on the side of the radio used for programming can be accessed when the radio is installed. The AnyTone 578 Go Box uses a plastic ammo can so that the optional AnyTone BT-01 can be used when the box is closed. The passthrough BNC antenna connector has rubber gaskets and is weather resistant when the protective cap is installed. The battery monitor is made by Powerwerx. The power switch is a high quality Blue Sea Contoura III. This Go Box has a cubby that can store the hand mic, a BT-01, and a Signal Stick. The design facilitates running the radio on a desk, in a vehicle or watercraft with the box closed, or in a backpack with the box closed. Running the radio with the box closed is made possible by the wireless BT-01 handset. The faceplate is easily removed and replaced with the faceplate Turn Button Fasteners.
Each kit is hand made to order. Please allow 12-18 days to ship.
***This Go Box does not include the actual radio.*** You will need to provide your own radio, an antenna, and a charger.
I recommend this charger for AC charging: https://powerwerx.com/charger-lifepo4-powerpole-12v-4a
I recommend this charger (set to 4A) for mobile use: https://powerwerx.com/dcdc-charger-lifepo4-8a-adjustable
I recommend the Ed Fong J-Pole Dual Band Roll-Up: https://grapevineamateurradio.com/products/ed-fong-j-pole-antennas-dual-band-220-and-roll-up?variant=32440756568243
The AnyTone 578 Go Box features two 6ah LifePo4 batteries for a total of 12ah of battery capacity. The batteries can be charged with 14.6v via the Anderson Powerpole connectors. The GPS antenna SMA port is accessible via the faceplate. Additionally, the USB port on the side of the radio used for programming can be accessed when the radio is installed. The AnyTone 578 Go Box uses a plastic ammo can so that the optional AnyTone BT-01 can be used when the box is closed. The passthrough BNC antenna connector has rubber gaskets and is weather resistant when the protective cap is installed. The battery monitor is made by Powerwerx. The power switch is a high quality Blue Sea Contoura III. This Go Box has a cubby that can store the hand mic, a BT-01, and a Signal Stick. The design facilitates running the radio on a desk, in a vehicle or watercraft with the box closed, or in a backpack with the box closed. Running the radio with the box closed is made possible by the wireless BT-01 handset. The faceplate is easily removed and replaced with the faceplate Turn Button Fasteners.
Each kit is hand made to order. Please allow 12-18 days to ship.
***This Go Box does not include the actual radio.*** You will need to provide your own radio, an antenna, and a charger.
I recommend this charger for AC charging: https://powerwerx.com/charger-lifepo4-powerpole-12v-4a
I recommend this charger (set to 4A) for mobile use: https://powerwerx.com/dcdc-charger-lifepo4-8a-adjustable
I recommend the Ed Fong J-Pole Dual Band Roll-Up: https://grapevineamateurradio.com/products/ed-fong-j-pole-antennas-dual-band-220-and-roll-up?variant=32440756568243
The AnyTone 578 Go Box features two 6ah LifePo4 batteries for a total of 12ah of battery capacity. The batteries can be charged with 14.6v via the Anderson Powerpole connectors. The GPS antenna SMA port is accessible via the faceplate. Additionally, the USB port on the side of the radio used for programming can be accessed when the radio is installed. The AnyTone 578 Go Box uses a plastic ammo can so that the optional AnyTone BT-01 can be used when the box is closed. The passthrough BNC antenna connector has rubber gaskets and is weather resistant when the protective cap is installed. The battery monitor is made by Powerwerx. The power switch is a high quality Blue Sea Contoura III. This Go Box has a cubby that can store the hand mic, a BT-01, and a Signal Stick. The design facilitates running the radio on a desk, in a vehicle or watercraft with the box closed, or in a backpack with the box closed. Running the radio with the box closed is made possible by the wireless BT-01 handset. The faceplate is easily removed and replaced with the faceplate Turn Button Fasteners.
Each kit is hand made to order. Please allow 12-18 days to ship.
***This Go Box does not include the actual radio.*** You will need to provide your own radio, an antenna, and a charger.
I recommend this charger for AC charging: https://powerwerx.com/charger-lifepo4-powerpole-12v-4a
I recommend this charger (set to 4A) for mobile use: https://powerwerx.com/dcdc-charger-lifepo4-8a-adjustable
I recommend the Ed Fong J-Pole Dual Band Roll-Up: https://grapevineamateurradio.com/products/ed-fong-j-pole-antennas-dual-band-220-and-roll-up?variant=32440756568243